Specifications Applicable Tube: copper, titanium and aluminum tubing. Applicable Tube Size: 1/4", 3/8", 1/2", 3/4" Flare Type: for refrigerant R-410A Dimensions: 122x67.5x274 with battery 

SIX EASY STEPS: 1. deburr inside of tubings. 2. choose flare clip according to fasten the tubings. 3. press ‘ → 'switch to the end. 4. connect flare clip with flaring tool. 5. press ‘ ← 'until flare work complete. Press ‘ → 'to the end. 6. take off flare clip from flaring tool and separate flare clip with tubings. Introduction The 59543 cordless eccentric cone flaring tool is our new high capability product. Cordless, battery power. This product can be used for 1/4"~3/4" (6mm~19mm) tubing. Special eccentric cone structure make smooth and uniform sizes 45 degree flares. Eccentric Cone The eccentric cone moves forward with a rotary motion, to gradually push and expand the inner diameter of the copper tube. The forward movement of the cone is then stopped by the clutch, which activates st a predetermined pressure. The flared surface of the copper tube is given a clean finish by the cone's rotary motion. 

Item No. | Clamps | Item No. | Clamps | 59543L-01 | For inch : 1/4" | 59543M-01 | For metric : 6mm | 59543L-02 | For inch : 5/16" | 59543M-02 | For metric : 8mm | 59543L-03 | For inch : 3/8" | 59543M-03 | For metric : 10mm | 59543L-04 | For inch : 1/2" | 59543M-04 | For metric : 12mm | 59543L-05 | For inch : 5/8" | 59543M-05 | For metric : 16mm | 59543L-06 | For inch : 3/4" | 59543M-06 | For metric : 19mm |
|